I. KabelElectromagnetic Flow Meter Cooling, Thermal Energy Meter

1Signal ku Magnetic Line

1.1Signal Line Processing

Tɛ̈n yenë thermal meter ku sensor luɔ̈ɔ̈i thïn, ke conductivity ye tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n50μS/cmKa cɛ̈ɛ̈k, ka cɛ̈ɛ̈k ye cɔl traffic signal transmission cableRVVPB2*0.12*280 mm 2PVC ye cɔl metal net shielding signal cable. A tɛ̈n bɛ̈ɛ̈i ka dɔ̈ŋ100m. Signal line and sensors support factory. Signal line and sensors support factory. Signal line and sensors support factory. Signal line and sensors support factory. Signal line and sensors support factory. Signal line and sensors support factory. Thermometer kënë ee kɔc cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye cɔl a ye c Ni conductivity ye tɛmɛ ka tɔ̈u50μS/cmWala tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë MisalSTT3200Kabel khusus walaBTSType triple shielded signal cable.

1.2 Magnetic Lines

Magnetic current line can use two core insulated rubber soft cable, recommended model isRVVP2*0.12*250mm2.Length of magnetic current line and signal cable length.*.Length of magnetic current line and signal cable.*.Length of magnetic current line and signal cable.*.Length of magnetic current line and signal cable.*.

Sa a tʋmSTT3200Sa kabel ye kɛ̈ɛ̈k ye, kabel ye magnet ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye.

2Kabel terminal instrument

Kä ye nyuɔɔth në terminals de wiring aye:：Tabel 1.1

3Output ku Power Cable

Kä ye kek bɛ̈n looi la kä ye kek bɛ̈n looi aye kɔc ye kek tɔ̈ɔ̈u në kë de kä ye kek looi. Ku yïn tɛ̈ɛ̈r ba kë wïc bï yïn ya looi ya tɛ̈ɛ̈r.

3.1Frequency, pulse output wiring

Frequency, pulse output external power supply and load (Frequency, pulse output external power supply and load) (Frequency, pulse output external power supply and load) (Frequency, pulse output external power supply and load) (Frequency, pulse output external power supply and load) (Frequency, pulse output external power supply and load) (Frequency, pulse output external power supply and load) Na ye luui në kë ye cɔl sensory load, a dhil bɛ̈n ya tɔ̈ɔ̈u në diode de continuum yic.

Diagram1.3 Power Supply External Connected Electronic Counter

Diagram1.4 Elektronik Counter ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ

3.2Current output wiring

Diagram1.5Current output ye

3.3TabelOCDoor Connection

Diagram1.6TabelOCDoor Connection

3.4Converter Installation Grounding Requirements

Converter shell grounding terminals should not be used less than1.6mm²Wire copper ye piny gɛɛr. Ka bɛ̈n tɔ̈u piny ka bɛ̈n tɔ̈u piny ka bɛ̈n tɔ̈u piny ka bɛ̈n tɔ̈u piny10ΩYe.

FɔlɔAΦ20Purple copper tube, ye cɔl1700mmLong (can be extended as needed) looi piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny piny1500mm (Lëk:Tɛ̈n yenë kɔ̈k tɔ̈ɔ̈u thïn, tɔ̈ɔ̈u kɔ̈k tɔ̈ɔ̈u thïn, tɔ̈ɔ̈u kɔ̈k tɔ̈ɔ̈u thïn, tɔ̈

DuuɔA4mm²Wire purple copper welded on the ground nail, and finally connect the ground wire to the sensor flange, ground ring, and pipeline flange, see Figure 1.7. Wire purple copper welded on the ground nail, and finally connect the ground wire to the sensor flange, ground ring, and pipeline flange, see Figure 1.7.

Note: Fixed ground screws, bullet pads, and flat pads require stainless steel materials.

II. Parameter Introduction Electromagnetic Flow Meter Cooling, Thermal Energy Meter

1Parameters of flow

1.1Metre luɔi mode

L_MagHElectromagnetic flow metering has three working modes: hot meter working mode, cold meter working mode, and cold meter working mode. Electromagnetic flow metering has three working modes: hot meter working mode, cold meter working mode, and cold meter working mode.

Thermometer mode: Calculate only the heat, is the default method of the meter. Thermometer mode: Calculate only the heat, is the default method of the meter. Thermometer mode: Calculate only the heat, is the default method of the meter. “H"Warm ye nyuɔɔth

Cool Meter Mode: Calculate cold only. “R"a nyuɔɔth coolness

Cool Meter Heat Meter Mode: Cool Meter Heat Meter bɛ̈ɛ̈i tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u.

1.2Measure the diameter of the pipeline (Kɔl kalibre pipi)

L_MagHElectromagnetic Flow Meter Sensor Pass Range:10～2000Milimɛt.

10、15、20、25、32、40、50、65、80、100、125、150、200、250、300、350、400、450、500、600、700、800、900、1000、1200、1400、1600、1800、2000Ye.

1.3Heat flow, cold flow unit

Kä ye kek tïŋ në thermal display unit aye:MJ/h、GJ/h、KWh/h、MWh/hAw bɛ yɔ̈ɔ̈r 4.

1.4Taim damping tɛmɛ

I.e. Filter Time,Lëk juëc ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈n ye kek tɛ̈ Lɔ̈ɔ̈i koor ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈ Lɔ̈ɔ̈m de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam de kaam.

1.5 Lɔ̈ɔ̈i de Traffic

Na raan ye luui tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ

A ye rot looi, a ye rot looi, a ye rot looi, a ye rot looi, a ye rot looi.

1.6Traffic Zero Point Fix

Na ye zero point correction, a dhil tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen tɛmɛ yen. Zero point de flux ye nyuɔɔth në velocité de flux, unit ye mm/s. Thermometer flow zero point correction ye nyuɔɔth:

Nyuɔ̈th tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n:FSA nyuɔɔth kä ye kek them në instrument zero point;

Downline big letter display: zero point correction value of flow speed (Lɛɛr dɛ̈t dɛ̈t dɛ̈t dɛ̈t dɛ̈t dɛ̈t dɛ̈t dɛ̈t)

NiFSWala nyoth“0”Na yïn adhil ba correction valueFS = 0. Lëk: N'a yɛlɛɣa wɛ̈ɛ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r,FSValue increase, you need to change the downline value of positive, negative symbols, so that the value increases, you need to change the downline value of positive, negative symbols, so that the value increases, you need to change the downline value of positive, negative symbols, so that the value increasesFSA bɛ se ka 0 ye.

Kä ye cɔl zero point of flow ye kë ye cɔl constant value ye cɔl sensor ye, a ka dhil ka gɔ̈ɔ̈r de sensor ye gɔ̈ɔ̈r de sensor ye gɔ̈ɔ̈r de sensor ye gɔ̈ɔ̈r de sensor ye gɔ̈ɔ̈r de sensor. Loktu ye sɛbɛn, sensor zero point value ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba ye lamba.

1.7Signal Removal Point fitin

A tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ Ni a tɛ̈ɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n

1.8Temperature Difference Signal Removal

Temperature Difference Signal Removal: To temperature difference in the entrance and exit is lower than this setting, the instrument does not calculate the heat cold amount. Temperature difference signal removal: To temperature difference in the entrance and exit is lower than this setting, the instrument does not calculate the heat cold amount.

1.9Units de trafic total

Heat meter ye nyuɔɔth9Bit Counter, maximum allowed count is999999999Ye.

Unite de trafic total ye:m³(Metre kubik).

Kä ye kek looi aye:0.001m³、0.010m³、0.100m³、1.000m³ Ye.

1.10Heat, cold total units

Heat meter ye nyuɔɔth9Bit Counter, maximum allowed count is999999999Ye.

Units de calorie total ye:MJ、GJ、KWh、MWhYe.

A total calorie equivalent ye:0.001MJ、0.010MJ、0.100MJ、1.000MJ

0.001GJ、0.010GJ、0.100GJ、1.000GJ

0.001 KWh、0.010 KWh、0.100 KWh、1.000 KWh

0.001 MWh、0.010 MWh、0.100 MWh、1.000 MWh

Lëk:KWh、MWhUnits ye nyuɔɔth8Bit valid number, maximum accumulated99999999A ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ

1.11Reverse Measurement Forbidden

L_MagHElectromagnetic Flow Meter yeReverse output prohibition function, when "prohibited", don't count the heat, cold quantity, no output, only flow speed display; "Allow" when the heat meter all works correctly, because in principle the reverse flow should not count the heat, cold quantity, all default settings to "forbidden" when the "allow" when the heat meter all works correctly, because in principle the reverse flow should not count the heat, cold quantity, all default settings to "forbidden" when the "allow" when the heat meter all works correctly, because in

2Parameters output

2.1Current output method

L_MagHElectromagnetic Flow Meter Thermometer aye bɛ̈n looi në dhöl dhiëc:Flow output, thermal output, cold output, cold and hot state output, flow direction output.

Flow output: Current output in instant flow percentage, percentage position displays the percentage of flow; flow output: Current output in instant flow percentage, percentage position displays the percentage of flow; flow output: Current output in instant flow percentage, percentage position displays the percentage of flow;

Heat output: Current output in instant heat percentage, percentage position displays the percentage of heat. Heat output: Current output in instant heat percentage, percentage position displays the percentage of heat. Heat output: Current output in instant heat percentage, percentage position displays the percentage of heat;

Cool output: Current output in instant cold percentage, percentage position displays the percentage of cold; Cool output: Current output in instant cold percentage, percentage position displays the percentage of cold; Cool output: Current output in instant cold percentage, percentage position displays the percentage of cold; Cool output: Current output in instant

A ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye

Flow direction output: Current output indicates a positive reverse flow, 20mA when reversed, and 4 mA when positive. Flow direction output: Current output indicates a positive reverse flow, 20mA when reversed, and 4 mA when positive.

2.2Flow, Heat, Cold Range Settings

Meter range setting refers to determining the upper limit flow value, the lower limit flow value of the instrument is automatically set as“0”Ye.

O kama, ka tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ

% wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t=(Flow value measurement)/Gauge range)* 100 %；

Kä ye kek tɔ̈ɔ̈u në gauge yic=(Flow value measurement)/Gauge range)* 20 mA + 4mA；

Value output frequency de instrument=(Flow value measurement)/Gauge range)* Frequency full range value.

2.3Pulse output suguya

L_MagHElectromagnetic flow meter pulse output has 16 ways:Pulse Ltr, Pulse m3,

Heat pulse MJ, heat pulse GJ, heat pulse KWh, cold output MWh, cold pulse MJ, cold output GJ, cold output KWh, cold output MWh, cold and hot pulse MJ, cold and hot pulse GJ, cold and hot pulse KWh, cold and hot output MWh, cold and hot state output, flow direction output.

Frequency output method: Frequency output is continuous square wave, frequency value corresponds to the flow percentage, see details2.4；

Pulse output method: pulse output is a rectangular wave pulse string, pulse each indicates a pipeline flowing through a flow equivalent, pulse equivalent by "pulse output type" and below“Output pulse coefficient" ye parameter fila ye tɛmɛ. Pulse output method aye luɔ̈ɔ̈i në total accumulation, ye rot mat keke accumulation instrument;

Cool and hot state output: pulse output indicates cold and hot state, heat is low level, and cold quantity is high level. When pulse output indicates cold and hot state, heat is low level, and cold quantity is high level. When pulse output indicates cold and hot state, heat is low level, and cold quantity is high level.

Flow direction output: When pulse output indicates the flow direction, a positive level is low, and a reverse level is high. A pulse output indicates the flow direction, a positive level is low, and a reverse level is high. A pulse output indicates the flow direction, a positive level is low, and a reverse level is high.

2.4Frequency output limit

L_MagHElectromagnetic flow meter frequency corresponds to flow percentage output (not corresponding to heat and cold quantity), range optional1~5000Fɛɛr de kalkulɛr ee:

Value output frequency de instrument=(Flow value measurement)/Range of flow)* Frequency fullSkalakä ye kek looi;

2.5Pulse coefficient output ye

Pulse coefficient ye pulse equivalent ye0.001～59.999Units and selected pulse output type units*, ye luɔɔi bï pulse output ya tɛmɛ.

2.6Pulse width ye output

Pulse output is low level effective, pulse width: Pulse output is low level effective, pulse width: Pulse output is low level effective, pulse width: Pulse output is low level effective, pulse width: Pulse output is low level effective.01~499.9ms

Pulse widthDegrees <unk> Maximum output pulse number corresponding to the table (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1) (Table 2.1)