Nude battery four-station thermal presser, a classic core part of the rotating plate thermal pressing mechanism, uses the upper and lower pressing plate heating method thermostat control temperature to heat the battery, while using dual cylinder output to achieve increased pressure effect to heat pressure, using one out of four simultaneous hot pressing food method to improve equipment efficiency. Battery thermal pressure is by setting a reasonable time, temperature, pressure on the bare battery to heat pressure molding, controlling the bare battery thickness, to prevent positive, negative polar pieces relative displacement. Battery thermal pressure is by setting a reasonable time, temperature, pressure on the bare battery to heat pressure molding, controlling the bare battery thickness, to prevent positive, negative polar pieces relative displacement.

Laboratory Lithium Battery Thermal Press

Kä ye kek looi aye looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi bï kek ya looi.

Lithium Battery Hot Press Parameters

1 <unk> Kuen: 6820*2640*2800mm

2<unk> Capacity: 24PPM

3<unk> Wël ye kek looi: W: 70-200mm, H: 70-220mm, T: 10-40mm

4<unk> Warm pressure time: 7-10s

5<unk> Thermal pressure temperature: 80-130°C adjustable

6<unk> Main pressure: 1-10 ton adjustable

7<unk> Side pressure: 0.1-1 ton adjustable standard configuration

8<unk> Robot ye rot looi

9 <unk> Caching Mechanism

10<unk> Mechanism ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl

11<unk> Kä ye kek looi në Hi-pot Test Mechanism

12 <unk> Plate ye luui në luɔɔi kɔ̈k peei, ku ka cɛ̈ɛ̈r ye cɛ̈ɛ̈r ye cɛ̈ɛ̈r ye cɛ̈ɛ̈r

13<unk> Two-layer thermal pressure station, up and down two layers linkage, high reliability. 13<unk> Two-layer thermal pressure station, up and down two layers linkage, high reliability. 13<unk> Two-layer thermal pressure station, up and down two layers linkage, high reliability.

14 <unk> Parallelisme de plaque de pression thermique ±0.1mm

15<unk> Tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ

Kä ye kek tɔ̈ɔ̈u në tɛ̈n yenë kek tɔ̈ɔ̈u në tɛ̈n yenë kek tɔ̈ɔ̈u në tɛ̈n yenë kek tɔ̈ɔ̈u në tɛ̈n Hot pressurized plate includes the lower hot pressurized plate and the upper hot pressurized plate, the upper hot pressurized plate and the lower hot pressurized plate are used to apply pressure to the cell, the upper hot pressurized plate and the lower hot pressurized plate are indirect contact with the cell. Hot pressurized plate includes the lower hot pressurized plate and the upper hot pressurized plate, the upper hot pressurized plate and the lower hot pressuri

Lithium Battery Fully Automatic Heat Press

Lithium battery fully automatic thermal presser This type of battery thermal press method and device has a simple structure, easy implementation, low implementation cost, battery thermal pressure quality good, battery safety performance high and other existing technologies are not available. Lithium battery fully automatic thermal presser This type of battery thermal press method and device has a simple structure, easy implementation, low implementation cost, battery thermal pressure quality good, battery safety performance high and other existing technologies are not available.